RX-0 Unicorn Gundam Ver.Ka (MG1/100)

Unicorn Mode & Destroy Mode

Veteran mecha designer Hajime Katoki again brings his style to Bandai's popular Master Grade (MG) series, this time with his design of Unicorn Gundam! The titular mecha from the "Mobile Suit Gundam Unicorn" serial novel comes sharply molded on colored runners and is capable of being switched between Unicorn Mode and Destroy (NT-D) Mode. In Unicorn Mode, the all-white Mobile Suit has a horn projecting from its forehead that resembles that of the mythical creature for which it was named. When switching to NT-D Mode, its armor slides open to reveal its psychoframe, the four blades on the shield expand outwards, its unicorn horn opens, and a different face is revealed. Its armaments include four beam sabers, a beam magnum, hyper bazooka, and shield. Sheets of foil stickers, Gundam decals, and marking stickers are included. Build two kits and display them side by side, one in each mode--both designs look too cool to display only one at a time!

DETAILS:
-Unicorn Gundam from "Mobile Suit Gundam UC" drawn by Harutoshi Fukui is became a kit as Ver.Ka in MG series.
-White colored "Unicorn Mode" and "Destroy Mode" with psycho frame can be expressed.
-A light-harvesting psycho frame gives a shining impression.
-Beam weapon, 2 beam sabers, bazooka, sliding shield included.
-Scale 1/100 Model Original from "GUNDAM UC"
-Series: GUNDAM MASTER GRADE
-Size/Weight: 39.0 x 31.0 x 9.5 cm/1050g
-Manufactured by Bandai
-Release Mid Dec 2007
-Regular Price 5,000 yen about 46.37 USD 29.52 Euros

MSN-04 SAZABI METALLIC COATING Ver.

This design was the MSN-04 Sazabi, and it was constructed by the Luna-based contractor Anaheim Electronics. Despite its large size and heavy armor, the Sazabi was equipped with enough thrusters and verniers to make it extremely maneuverable compared to mass-produced frontline mobile suits. It was equipped with a relatively high-output generator, but most of its power was used to fire its abdomen-mounted mega particle gun, whose beam was wide enough and powerful enough to destroy several mobile suits with a single shot. The Sazabi's armament was rounded out by a pair of beam sabers, a large shield carrying three missiles and a large, hand-carried beam tomahawk, and a beam shotrifle, which operated like a beam rifle version of a shotgun.

DETAILS:
-MS Sazabi from " Mobile Suit Gundam: Char's Counterattack" is now available as MG metallic coating version.
-Exclusive water slide mark for its metallic body is included.
-The hatch of the funnel container can open and close and funnel can be detached. All funnels can be developped according to the setting.
-A foot and a back pack internal mechanism are expressed by precisely.
-The damper of the humerus and the leg can expand and contract; so you can enjoy the slide action.
-The beam saber and beam Tomahawk from which even the second joint is trained to the beam shotgun and the wrist by a movable hand can be firmly maintained.
-Scale 1/100 Model
-Series: GUNDAM MASTER GRADE
-Size/Weight: 32.0 x 59.0 x 12.0 cm/1,518g
-Manufactured by Bandai
-Release Late Dec 2007
-Regular Price 14,000 yen about 129.85 USD 82.66 Euros

Nu Gundam Metallic Coating Ver. (MG 1/100)

Nu Gundam metallic coating version does look amazing standing as pair with MSN-04 Sazabi (also the metalic version). When compared with normal MG Nu Gundam, it is only metalic coated, but supplied with different decal pack creating different finish to the normal one. I would definately recommend to buy this product even you have already got standard Nu Gundam! The plastic model (plamo) is manufactured in top-quality, easy to built (the same as normal Nu Gundam), yet beautiful finish. Whoever love these 'plamo' this is the must have item!! to complete your collection of amuro vs char!

DETAILS:
-RX-93 Nu Gundam Metallic Coating (MG)
-E.F.S.F AMURO RAY'S CUSTOMIZE MOBILE SUIT FOR NEW TYPE
-Scale 1/100 Model Original from "Char`s Strike Back"
-Series: GUNDAM MASTER GRADE
-Size/Weight: 31.0 x 39.0 x 12.2 cm/1130g
-Manufactured by Bandai
-Release Late Feb 2008
-Regular Price 8,500 yen about 78.84 USD 50.19 Euros

RX-78-2 Gundam Ver.2.0 (MG 1/100)

The third mobile suit developed under the Earth Federation's top-secret "Project V," the RX-78 Gundam series saw final assembly and rollout at the Side 7 colony under the supervision of engineer Lieutenant Tem Ray. Three prototypes were constructed, although only one unit, the RX-78-2, survived a Zeon attack on Side 7 when Project V was discovered by Zeon Lieutenant Commander Char Aznable. The RX-78-2, having been commandeered by Ray's young son Amuro, fended off the attack and was transferred to the assault carrier White Base. Amuro Ray would continue to serve as the Gundam's pilot for the remainder of the One Year War, being White Base's mobile front line of defense.

DETAILS:
-The long-anticipated Master Grade 2.0 version of the constantly evolving RX-78-2 Gundam design is here!
-Includes accurate proportions and features that are faithful to the Gundam as it appeared in the classic animated TV series!
-An all-new "full action inner frame" allows the Gundam's waist to twist and move forward and back even with the Core Fighter in place.
-Three-part sole design enhances contact of feet with the ground.
-Accurately sculpted Core Fighter features a pilot's seat that rotates to face forward during transformation into Core Block mode.
-Weapons include beam rifle, "super napalm" canister, hyper bazooka, two beam sabers, a beam javelin, the Gundam hammer, and shield, each with appropriate action features.
-Manufactured by Bandai
-Release Late Jul 2008
-Regular Price 4,200 yen about 38.95 USD 24.8 Euros

ZGMF-X56S Force Impulse Gundam (MG 1/100)

The ZGMF-X56S/α Force Impulse Gundam is the ZAFT equivalent to the Earth Alliance's GAT-X105+AQM/E-X01 Aile Strike Gundam. The Force Silhouette pack provides the Impulse Gundam with increased mobility in space, as well as atmospheric flight on Earth. The Force Silhouette pack is stored on the Minerva's dedicated hangar for the Impulse Gundam and is sent out onto the field via a computer-controlled flyer craft. The flyer delivers the pack to the Impulse Gundam and automatically returns to the Minerva. The Force Silhouette pack docks with the Impulse Gundam via a laser lock. The only additional armament carried by the Force Silhouette pack is a pair of beam sabers.

DETAILS:
-ZGMF-X56S Force Impulse Gundam (MG)
-Z.A.F.T. MOBILE SUIT ZGMF-X56S/œ
-Scale 1/100 Model Original from "GUNDAM SEED DESTINY"
-Series: GUNDAM MASTER GRADE
-Size/Weight: 39.0 x 31.0 x 9.5 cm/1050g
-Manufactured by Bandai
-Release Date Late May 2008
-Regular Price 4,500 yen about 41.74 USD 26.57 Euros

Shin Musha Gundam (MG 1/100)

Based on Hajime Katoki's design of Shin Musha Gundam that appeared in the "Gundam Musou" PS2 game, the samurai-armored Mobile Suit.

DETAILS:
-Shin Musha Gundam joins the Master Grade series!
-Based on the Ver. O.Y.W. 0079 frame for excellent articulation and action posing!
-Front armor skirts are made of independent plates just like actual samurai armor, for realistic appearance when legs are posed.
-The "Nichirin-maru" sword comes with a removable scabbard that can be attached to the left waist.
-Backpack unit holds accessory weapons, including the Sankomaru spear, the Denkomaru halberd, and Tanegashima rifle.
-Scale 1/100 Model Original from "Gundam Musou Special PS2"
-Series: GUNDAM MASTER GRADE
-Size/Weight: 40.0 x 31.0 x 9.0 cm/1050g
-Manufactured by Bandai
-Release Date Mid Jun 2008
-Regular Price 5,000 yen about 46.37 USD 29.52 Euros